Custom School Signs for Campuses, Classrooms, and Hallways 

Outdoor Signs for Schools and Welcome Signs

School campus signs start at the road. We build monument signs, pylon signs, marquee and digital message boards, and dimensional building letters. Welcome signs for schools carry the mascot and colors at the main entrance, where visitors decide which door to use. Digital boards let the front office post an early dismissal without sending anyone outside with a ladder and a box of plastic letters.

Classroom Door Signs and Door Signs for Classrooms

Room identification is the signage people touch every day. We make classroom door signs with tactile characters and Braille, changeable name inserts so a teacher change does not mean a new sign, and matching number plates. Classroom signage holds up better when the insert slides out of a frame instead of being a printed sticker that peels at the corner.

Hallway and Wayfinding Signs

Signs in school corridors keep visitors out of the office queue. Directional signs, school stop signs for hallways, restroom and office identification, and floor or wing markers all work as one set. Good wayfinding means a parent can get from the visitor lot to the gym without asking anyone.

School Safety Signs and Event Signage

Safety signage covers emergency exits, evacuation maps, visitor check-in, secure-entry notices, and lockdown room identification. School event signage is the other half: banners, sports and booster boards, changeable letter boards, and seasonal signs for graduation or open house. Educational signage like donor walls and hall-of-fame boards sits alongside both.

ADA Compliance and Safety Standards

Permanent room identification has to meet the 2010 ADA Standards for Accessible Design. In plain terms, that means raised characters with Grade 2 Braille, a non-glare finish, and enough contrast between the characters and the background. Mounting height matters too: the baseline of the lowest tactile character sits at least 48 inches above the floor, and the highest baseline no more than 60 inches.

Fire and life-safety signage follows your local fire marshal. We build to the standard and flag anything unusual, but you should confirm final placement with your local code officials.

Planning signage for a campus? Call (770) 889-1212 or request a free quote.

Materials and Durability for School Environments

Signage in schools takes more punishment than most commercial work. We specify aluminum and dibond for exterior panels, and acrylic for interior room identification. HDU suits carved monument faces. PVC or vinyl works where a sign needs to be light and easy to replace. Interior signs near lockers and doorways get tamper-resistant fasteners, because a sign held on with standard screws becomes a souvenir.

Our Process: From Site Visit to Installation

1. Site visit and survey. We walk the campus, measure, and photograph each location.
2. Design and proof. You get scaled drawings and site overlays before anything is cut. See our sign design and manufacturing process.
3. Permits. Exterior signs usually need one. We prepare and submit the paperwork to the City of Atlanta Office of Buildings or your county equivalent.
4. Fabrication. Built in our own shop, so the approved proof and the finished sign match.
5. Installation. Scheduled around school hours, after dismissal, or during a break.

Why Schools Choose Altair Sign

We have been making and installing signs in Metro Atlanta for more than 20 years, working out of our own facility in Smyrna. One team handles design, permitting, fabrication, and installation, so nobody is waiting on a subcontractor to call back.

Our labor and materials both carry a warranty. We also service and update signs we did not originally build, which matters when a campus has twenty years of mixed signage on it.

Get a Free School Signage Quote

Tell us the campus, the areas you need covered, and your target date. We will do a site visit, plan the custom signs for schools you actually need, and give you a written quote. Call (770) 889-1212 or request a free quote. Altair Sign & Light, 2600 Mathews St SE, Smyrna GA 30080.

FAQs

What types of signs do schools need?

Most campuses need five groups: exterior identification such as monument or marquee signs, welcome and entrance signs, classroom door signs with Braille, hallway wayfinding, and safety signage for exits and visitor check-in. Event banners and donor walls are usually added later as budget allows.

Are your classroom door signs ADA compliant?

Yes. Permanent room identification signs are built with raised characters, Grade 2 Braille, and a non-glare finish, and we mount them at the heights the 2010 ADA Standards require. We confirm placement with your facilities team before installation so nothing conflicts with door hardware.

How long does it take to make and install school signs?

Interior sign packages usually run three to five weeks from approved artwork. Exterior signs take longer because of permitting, which is the least predictable stage. Tell us your deadline early, such as a term start or an open house, and we will schedule backwards from it.

Can installation be done outside school hours?

Yes. We schedule exterior work and anything noisy for after dismissal, at weekends, or during term breaks. Interior installs in occupied buildings are usually done in sections so corridors stay clear during the school day. Tell us your calendar and we will work around testing weeks and events.

Do you help with permits for outdoor school signs?

Yes. We pull the permit and prepare the drawings and site plan that go with it. Rules are not the same in Smyrna as they are in Decatur, so we read the local code for your address before we quote. Monument and pylon signs are the ones most likely to need review.

Can you match our school colors, logo, and mascot?

Yes. Send your brand or athletics style guide and we will build to it. If you only have a logo file, we will color match from it and send a proof so you can approve the exact shade before fabrication.